Inleiding

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

  3. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Pry the font plastic component from the “motherboard” component.
    • Pry the font plastic component from the “motherboard” component.

  5. Take out the old rubber keypad and replace with a new one.
    • Take out the old rubber keypad and replace with a new one.

  6. Reassemble by following previous steps in reverse order.
    • Reassemble by following previous steps in reverse order.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Katherine

Lid sinds: 13-02-14

22 Reputatie

1 Handleiding geschreven

Team

Ohio State, Team 1-5, Meza Spring 2014 Lid van Ohio State, Team 1-5, Meza Spring 2014

OSU-MEZA-S14S1G5

4 Leden

4 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 4

Altijd: 502