Ga door naar hoofdinhoud

Minolta QTsi Maxxum Shutter Button Replacement

Wat je nodig hebt

  1. Minolta QTsi Maxxum Shutter Button Replacement, Shutter Button: stap 1, afbeelding 1 van 1
    • Locate the battery compartment on the bottom panel of the camera.

    • Open the battery door by using a coin.

    • In the counterclockwise direction, twist the coin in the battery door groove to open it.

  2. Minolta QTsi Maxxum Shutter Button Replacement: stap 2, afbeelding 1 van 1
    • Two batteries are located inside the battery chamber.

    • Remove the two batteries from the battery chamber by picking them up.

  3. Minolta QTsi Maxxum Shutter Button Replacement: stap 3, afbeelding 1 van 1
    • There is a screw located underneath the batteries in the battery compartment.

    • Unscrew and remove the (1) black Phillips #00 5mm screw from the battery compartment.

    • Ensure good lighting before attempting to remove this screw because it is hard to see inside the compartment.

  4. Minolta QTsi Maxxum Shutter Button Replacement: stap 4, afbeelding 1 van 1
    • From underneath the flash assembly, remove the (1) black Phillips #00 5mm screw

    • Be careful because you can lose the screw

  5. Minolta QTsi Maxxum Shutter Button Replacement: stap 5, afbeelding 1 van 1
    • The only screws remaining that hold the top panel of the camera in place are located next to the view finder.

    • Remove the (2) black Phillips #00 5mm screws from both sides of the view finder.

    • Be careful because you can lose the screw

  6. Minolta QTsi Maxxum Shutter Button Replacement: stap 6, afbeelding 1 van 2 Minolta QTsi Maxxum Shutter Button Replacement: stap 6, afbeelding 2 van 2
    • The top panel of the camera should now be easy to lift off. If it is not, make sure that all screws and attachments, listed in steps 1-5, have been removed.

    • Once all screws are removed, lift the top panel from the camera.

    • Be careful when removing the top panel because there are wires connected to it.

  7. Minolta QTsi Maxxum Shutter Button Replacement: stap 7, afbeelding 1 van 1
    • Use a metal spudger to push the button out of its socket so that you can place a new one in its place.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jordan Ellery

Lid sinds: 10/10/16

388 Reputatie

3 handleidingen geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 7

Altijd: 482