Repareer je spullen Gemeenschap Winkel

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement

Inleiding

Use this guide to replace a damaged gearcase insulator on a Milwaukee Reciprocating Saw 6538-21-B36B (2010).

The gearcase insulator is a component that protects the gear case in power tools. It helps prevent damage to the gear case by providing a layer of insulation and cushioning if damaged use this guide if it needs to be repaired.

  1. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: stap 1, afbeelding 1 van 2 Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: stap 1, afbeelding 2 van 2

    • Pull up on the shoe release lever until it's perpendicular to the gearcase insulator.

    Vertaal

  3. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: stap 2, afbeelding 1 van 1

    • Pull the shoe assembly out from the saw.

    Vertaal

  4. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: stap 3, afbeelding 1 van 2 Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: stap 3, afbeelding 2 van 2

    • Remove the gearcase insulator by folding over the rubber, dislodging the insulator from the red shift lever, and pulling it off.

    • Using the screwdriver to help lift the rubber over the lever and folding it over may be helpful.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 11

Altijd: 36