Ga door naar hoofdinhoud

Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement

Wat je nodig hebt

  1. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Outer Casing: stap 1, afbeelding 1 van 1
    • Remove the five T9 15.5 mm screws.

    • Remove the single T9 19.5mm screw.

    • Remove the two T9 37mm screws.

  2. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement: stap 2, afbeelding 1 van 1
    • Remove the drill casing to expose the drill's interior parts.

  3. Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: stap 3, afbeelding 1 van 3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: stap 3, afbeelding 2 van 3 Milwaukee Hex Impact Driver 2750-20 Directional Switch Replacement, Directional Switch: stap 3, afbeelding 3 van 3
    • Remove the trigger assembly completely.

    • Remove the directional switch by lifting upward using a pair of tweezers, clearing the alignment pole on the trigger assembly.

    • Insert a new directional switch by aligning the hole on the switch with the pole on the trigger.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 9

Altijd: 897