Ga door naar hoofdinhoud

Microsoft Surface Pro 2 Motherboard Replacement

Wat je nodig hebt

  1. Microsoft Surface Pro 2 Motherboard Replacement, LCD Display: stap 1, afbeelding 1 van 2 Microsoft Surface Pro 2 Motherboard Replacement, LCD Display: stap 1, afbeelding 2 van 2
    • To avoid electrical shocks, unplug and turn off your Surface Pro 2 before proceeding.

  2. Microsoft Surface Pro 2 Motherboard Replacement: stap 2, afbeelding 1 van 1
    • Avoid any skin or eye contact with the heating pad or heating gun because they may cause bodily harm.

    • Using a heating pad or heating gun, heat the edges of the screen to soften the glue. This area extends roughly one inch from the edge of the device.

    • The glue is under the darker border of the device display.

  3. Microsoft Surface Pro 2 Motherboard Replacement: stap 3, afbeelding 1 van 1
    • Using a plastic opening tool and a suction cup as needed for leverage, gently insert one edge of the opening tool under the corner of the screen.

    • If the tool does not easily slide under the screen, return to heating before proceeding.

    • Slowly work the tool around the entire edge of the screen.

  4. Microsoft Surface Pro 2 Motherboard Replacement: stap 4, afbeelding 1 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 4, afbeelding 2 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 4, afbeelding 3 van 3
    • Detach the orange cables that connect the screen to the motherboard by pulling on the small tabs. Using the nylon spudger, release these cables.

    • Please note the third small connector in red.

    • Allow the glue to cool before letting it come into contact with any other surface.

  5. Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: stap 5, afbeelding 1 van 3 Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: stap 5, afbeelding 2 van 3 Microsoft Surface Pro 2 Motherboard Replacement, Motherboard: stap 5, afbeelding 3 van 3
    • Make sure that the front-facing camera is completely disconnected, and then remove the plastic bracket.

    • Remove the 22 screws on the bezel.

    • Remove the left and right brackets; the left has 16 screws and the right has 15 screws.

    • The three different torx screws used are T3, T4, and T5.

  6. Microsoft Surface Pro 2 Motherboard Replacement: stap 6, afbeelding 1 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 6, afbeelding 2 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 6, afbeelding 3 van 3
    • Once the brackets are removed, set them aside.

    • The motherboard itself also has screws.

    • Remove the 25 screws of varying sizes that attach the motherboard to the back plate.

    • View the attached photo of a screw diagram to help keep track of your screws.

  7. Microsoft Surface Pro 2 Motherboard Replacement: stap 7, afbeelding 1 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 7, afbeelding 2 van 3 Microsoft Surface Pro 2 Motherboard Replacement: stap 7, afbeelding 3 van 3
    • You have now completely removed the motherboard, and it should look like the pictures shown.

    • Be sure to be cautious with all the connections with the cables on the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Christopher Doyle

Lid sinds: 09/07/16

131 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 6-2, Remmell Fall 2016 Lid van USF Tampa, Team 6-2, Remmell Fall 2016

USFT-REMMELL-F16S6G2

4 Leden

9 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 50

Altijd: 6,115