Ga door naar hoofdinhoud

Microsoft Surface 2 Speaker Replacement

Wat je nodig hebt

  1. Microsoft Surface 2 Speaker Replacement, Screen: stap 1, afbeelding 1 van 3 Microsoft Surface 2 Speaker Replacement, Screen: stap 1, afbeelding 2 van 3 Microsoft Surface 2 Speaker Replacement, Screen: stap 1, afbeelding 3 van 3
    • Begin by using a heat gun or the iOpener (This will take longer.) to melt the adhesive all around the outer edge of the screen.

    • Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping.

    • Avoid touching the metal end of the gun. It will be very hot and can burn you.

    • Insert the opening picks just under the screen and black edging. Be sure to place them evenly on each side.

    • Using the gap created by the picks, slowly pry the screen from the body of the Microsoft Surface 2 with a plastic opening tool. Pry as uniformly as possible.

  2. Microsoft Surface 2 Speaker Replacement: stap 2, afbeelding 1 van 3 Microsoft Surface 2 Speaker Replacement: stap 2, afbeelding 2 van 3 Microsoft Surface 2 Speaker Replacement: stap 2, afbeelding 3 van 3
    • Once the screen is free from the body, there will be a single ribbon cable connecting the screen to the motherboard.

    • Use a plastic spudger to pry the retaining clip away from the display cable.

    • The ribbon cable may be glued to the motherboard.

    • Carefully pull the ribbon cable from its socket on the motherboard.

  3. Microsoft Surface 2 Speaker Replacement, Speaker: stap 3, afbeelding 1 van 2 Microsoft Surface 2 Speaker Replacement, Speaker: stap 3, afbeelding 2 van 2
    • Work close to Magnetic Project Map to avoid losing screws.

    • Remove ten 3.45 mm T3 screws from the corners of the black plastic bezel.

    • Remove the remaining seventeen 4.4 mm T5 screws from the perimeter of the bezel.

    • Once all screws have been removed, lift and remove the bezel from the rest of the device.

  4. Microsoft Surface 2 Speaker Replacement: stap 4, afbeelding 1 van 1
    • Work close to Magnetic Project Map to avoid losing screws.

    • Using a T3 screwdriver, unscrew and remove the 3.5mm screws holding down the silver plates located at the corners of the device.

  5. Microsoft Surface 2 Speaker Replacement: stap 5, afbeelding 1 van 2 Microsoft Surface 2 Speaker Replacement: stap 5, afbeelding 2 van 2
    • Using tweezers, remove the cable connecting the speaker to the motherboard.

    • Peel up the tiny strip of yellow tape securing the cable to the motherboard.

  6. Microsoft Surface 2 Speaker Replacement: stap 6, afbeelding 1 van 2 Microsoft Surface 2 Speaker Replacement: stap 6, afbeelding 2 van 2
    • Lifting from the inmost end of the speaker, use a spudger to carefully pry the speaker from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

EG1

Lid sinds: 02/04/16

597 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 3-1, Wollert Spring 2016 Lid van USF Tampa, Team 3-1, Wollert Spring 2016

USFT-WOLLERT-S16S3G1

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 1,241