Ga door naar hoofdinhoud

Inleiding

This guide will cover how to remove the screen of the Microsoft Band 2 smartwatch. If the display is blank or dim it may be advantageous to consider replacing the screen on the Band 2.

  1. Wear proper gloves when using a heatgun.
    • Wear proper gloves when using a heatgun.

    • Use a heatgun to melt the adhesive beneath the screen. Heat the metal around edges of the screen.

    • Avoid heating the rubber watch band as it will quickly melt.

    • Heating the LCD screen may damage it. Avoid this procedure unless you intend to replace the screen.

  2. Use metal tweezers to gently detach the orange press-fit (or "pop") connector. Use metal tweezers to gently detach the orange press-fit (or "pop") connector.
    • Use metal tweezers to gently detach the orange press-fit (or "pop") connector.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Chris Syracuse

Lid sinds: 20-02-17

639 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team S1-G5, Leahy Spring 2017 Lid van USF Tampa, Team S1-G5, Leahy Spring 2017

USFT-LEAHY-S17S1G5

3 Leden

5 handleidingen geschreven

2 Opmerkingen

where I can buy microsoft band 2 screen. thanks

fredsonyo - Antwoord

Way too Late lol.

Rowdy Bedsaul - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 1,640