Ga door naar hoofdinhoud

Matsunichi MarquisPad MP977 Front Facing Camera Replacement

Wat je nodig hebt

  1. Matsunichi MarquisPad MP977 Front Facing Camera Replacement, Front Facing Camera: stap 1, afbeelding 1 van 1
    • Using the PH #00 Phillips head screwdriver, unscrew the two screws.

  2. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 2, afbeelding 1 van 3 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 2, afbeelding 2 van 3 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 2, afbeelding 3 van 3
    • Place the device face down on a flat surface.

    • Insert the wide-tipped plastic opening tool into the top of the left speaker slot.

    • Be sure not to puncture the covering of the speaker.

    • Pry the back plate open and slide the tool in a clockwise direction, moving it along the opening between the device and the back plate until you reach the power button.

  3. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 3, afbeelding 1 van 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 3, afbeelding 2 van 2
    • Insert the opening tool into the slot located to the right of the speaker, at the top edge of the device.

    • Then, pry open the back plate of the device , and slide the tool counter clockwise along the device until you reach the charging port.

  4. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 4, afbeelding 1 van 1
    • Remove the back plate and place it to the side of the device.

  5. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 5, afbeelding 1 van 1
    • With the same screw driver, PH #00 Phillips head, remove the seven screws holding in the motherboard.

    • Place the screws somewhere safe where they wont fall.

  6. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 6, afbeelding 1 van 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 6, afbeelding 2 van 2
    • Gently pull the camera optic fiber out of it's slot to release the flap. This will allow the flap to open easily.

    • Be sure not to damage the camera port.

  7. Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 7, afbeelding 1 van 2 Matsunichi MarquisPad MP977 Front Facing Camera Replacement: stap 7, afbeelding 2 van 2
    • Last, Insert the new camera into the pinhole camera slot.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kathryn Sherlock

Lid sinds: 03/24/15

127 Reputatie

1 Handleiding geschreven

Team

UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015 Lid van UMass Dartmouth, Team 4-1, Vijaybhaskar Spring 2015

UMASSD-VIJAYBHASKAR-S15S4G1

3 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 216