Ga door naar hoofdinhoud

Marshall MS-2 Speaker Replacement

Wat je nodig hebt

  1. Marshall MS-2 Speaker Replacement, Disassembling Marshall MS-2 Micro Amp Case Disassembly: stap 1, afbeelding 1 van 1
    • First be sure to turn the power switch to the off position.

    • Do this by turning the leftmost knob counter-clockwise as until the line points to "off."

    To turn the device off, turn the rightmost knob counterclockwise, not the leftmost one (which controls the volume).

    Célestin Taramarcaz - Antwoord

  2. Marshall MS-2 Speaker Replacement: stap 2, afbeelding 1 van 3 Marshall MS-2 Speaker Replacement: stap 2, afbeelding 2 van 3 Marshall MS-2 Speaker Replacement: stap 2, afbeelding 3 van 3
    • Now remove the battery.

    • On the back of the device locate the battery cover.

    • Remove it by pushing down on the clip.

    • Then pull the piece of fabric until the battery comes out.

  3. Marshall MS-2 Speaker Replacement: stap 3, afbeelding 1 van 2 Marshall MS-2 Speaker Replacement: stap 3, afbeelding 2 van 2
    • Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

    • Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

  4. Marshall MS-2 Speaker Replacement: stap 4, afbeelding 1 van 1
    • Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

  5. Marshall MS-2 Speaker Replacement, Speaker: stap 5, afbeelding 1 van 1
  6. Marshall MS-2 Speaker Replacement: stap 6, afbeelding 1 van 2 Marshall MS-2 Speaker Replacement: stap 6, afbeelding 2 van 2
    • Remove the two 7/16" screws located in the bottom left and top right corners with a phillips head screw driver. After removing the screws, the metal clips will need to be removed as well.

  7. Marshall MS-2 Speaker Replacement: stap 7, afbeelding 1 van 1
    • You may now remove the speaker by pulling it straight out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

MacKinley

Lid sinds: 10/22/13

796 Reputatie

5 handleidingen geschreven

4 opmerkingen

So where do we find a replacement speaker? If no parts are required what is the point in taking the speaker out?

Patrick Gillett - Antwoord

This speaker unavailable in Marlins. Any online sources. How should an untutored amateur repairer describe the replacement in order to get the right thing

Patrick Gillett - Antwoord

Any speaker that will fit should work. Might want to check to make sure the Watts they consume are the same. I imagine that if you put a speaker in that consumes more Watts you could potentially over heat the power supply or other components.

MacKinley - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 18

Altijd: 4,197