Ga door naar hoofdinhoud

MacBook Pro 17" Unibody Hard Drive Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.

Wat je nodig hebt

  1. MacBook Pro 17" Unibody Hard Drive Replacement, Hard Drive: stap 1, afbeelding 1 van 1
    • Remove the two Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive to the hard drive bracket.

    The screws are NOT captive to the bracket.

    Stephen - Antwoord

    on my 2009 A1297 the screws are captive.

    Lucienp - Antwoord

  2. MacBook Pro 17" Unibody Hard Drive Replacement: stap 2, afbeelding 1 van 1
    • Remove the hard drive bracket from the upper case.

  3. MacBook Pro 17" Unibody Hard Drive Replacement: stap 3, afbeelding 1 van 1
    • Use the hard drive's pull tab to lift it out of the upper case.

    • Don't try to completely remove the hard drive just yet! Its cable is still connected.

  4. MacBook Pro 17" Unibody Hard Drive Replacement: stap 4, afbeelding 1 van 2 MacBook Pro 17" Unibody Hard Drive Replacement: stap 4, afbeelding 2 van 2
    • Pull the hard drive connector away from the body of the hard drive.

    • Remove the hard drive from your MacBook Pro.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,084