Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

Remove the lower case to access most of your MacBook Pro's internals.

  1. Remove the following ten screws securing the lower case to the upper case:
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

  2. Essentiële Electronica Toolkit

    Kleine toolkit. Grote dromen.

    Shop Toolkits

    Essentiële
    Electronica
    Toolkit

    Shop Toolkits
  3. Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

17 andere personen hebben deze handleiding voltooid.

Andrew Optimus Goldheart

Lid sinds: 17-10-09

444.723 Reputatie

411 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

115 Leden

11.127 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 8

Afgelopen 7 dagen: 33

Afgelopen 30 dagen: 160

Altijd: 15,098