Ga door naar hoofdinhoud

MacBook Pro 15" Unibody Late 2011 Lower Case Replacement

Wat je nodig hebt

  1. MacBook Pro 15" Unibody Late 2011 Lower Case Replacement, Lower Case: stap 1, afbeelding 1 van 1
    • Remove the following ten screws securing the lower case to the upper case:

    • Three 13.5 mm (14.1 mm) Phillips screws.

    • Seven 3 mm Phillips screws.

    • When removing these screws, note how they come out at a slight angle. They must be reinstalled the same way.

  2. MacBook Pro 15" Unibody Late 2011 Lower Case Replacement: stap 2, afbeelding 1 van 1
    • Using both hands, lift the lower case near the vent to pop it off two clips securing it to the upper case.

    • Remove the lower case and set it aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

22 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 12

Altijd: 13,050