Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

While it may not be the first component that people gawk over when they see your fancy Retina display MacBook Pro, a nasty looking lower case can be a real eye-sore. Use this guide to help you replace a scratched, scuffed, bent or broken bottom panel.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  3. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

25 andere personen hebben deze handleiding voltooid.

Brett Hartt

Lid sinds: 12-04-10

117.161 Reputatie

143 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

123 Leden

11.785 handleidingen geschreven

i am willing to buy one backplate but i am unable to find somewhere on the internet to buy it, can some one please help me out with this? Thanks :D

Joan Manuel Rodriguez - Antwoord

Managed to clean six years worth of dust out, now the fans are much quieter! The keyboard is also cooler to the touch on idle. Thanks!

Austin Wang - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 21

Afgelopen 7 dagen: 94

Afgelopen 30 dagen: 453

Altijd: 46,473