Repareer je spullen Gemeenschap Winkel

MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement

Inleiding

Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.

Wat je nodig hebt

  1. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Remove the lower case screws: stap 1, afbeelding 1 van 1

    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

    Bewerken

  3. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Lift the lower case away: stap 2, afbeelding 1 van 1

    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

43 andere personen hebben deze handleiding voltooid.

Één opmerking

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.

glaubitz - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 15

Afgelopen 30 dagen: 36

Altijd: 39,076