Ga door naar hoofdinhoud

MacBook Pro 13" Unibody Early 2011 Lower Case Replacement

Wat je nodig hebt

  1. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement, Lower Case: stap 1, afbeelding 1 van 1
    • Remove the following ten screws:

    • Three 14.4 mm Phillips #00 screws

    • Three 3.5 mm Phillips #00 screws

    • Four 3.5 mm shouldered Phillips #00 screws

    • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

  2. MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: stap 2, afbeelding 1 van 2 MacBook Pro 13" Unibody Early 2011 Lower Case Replacement: stap 2, afbeelding 2 van 2
    • Use your fingers to pry the lower case away from the body of the MacBook near the vent.

    • Remove the lower case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

60 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 74

Altijd: 35,867