Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

Prereq to disconnect the battery

Onderdelen

Geen onderdelen opgegeven.

  1. If necessary, remove the plastic cover adhered to the battery contact board.
    • If necessary, remove the plastic cover adhered to the battery contact board.

  2. Manta schroevendraaierset

    112 bitjes voor elke reparatie.

    Upgrade Your Toolbox

    Manta schroevendraaierset

    Upgrade Your Toolbox
  3. Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board. Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.
    • Use the flat end of a spudger to lift the battery connector straight up out of its socket on the logic board.

    • Be sure you lift up only on the connector itself, not the socket, or you risk permanent damage to the logic board.

  4. Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.
    • Bend the battery connector up out of the way to prevent accidental contact with its socket during your repair.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Lid sinds: 18-10-12

407.923 Reputatie

547 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

116 Leden

11.199 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 672