Ga door naar hoofdinhoud

MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement

Alleen vereisten
Deze handleiding is alleen bedoeld als vereiste voor andere handleidingen. Het staat niet op zichzelf.
  1. MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: stap 1, afbeelding 1 van 3 MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: stap 1, afbeelding 2 van 3 MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement, SSD Assembly: stap 1, afbeelding 3 van 3
    • Use your thumb or finger to bend the plastic spring bar on the SSD tray, freeing the two clips at the front side of the device.

    • While holding the spring bar depressed, tilt the SSD assembly up out of its cavity.

  2. MacBook Pro 13" Retina Display Late 2012 SSD Assembly Replacement: stap 2, afbeelding 1 van 1
    • Remove the SSD assembly from the upper case.

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 607