Inleiding

Use this guide to replace a damaged lower case.

    • Before proceeding, power down your machine. Close the display and lay it on a soft surface top-side down.

    • Remove the following ten screws:

      • Two 9 mm P5 Pentalobe screws

      • Eight 2.6 mm P5 Pentalobe screws

    • The special screwdriver needed to remove the ten 5-point Pentalobe screws can be found here.

  1. Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.
    • Wedge your fingers between the display and the lower case and pull upward to pop the lower case off the Air.

    • Remove the lower case and set it aside.

Conclusie

To reassemble your device, follow these instructions in reverse order.

11 andere personen hebben deze handleiding voltooid.

Andrew Optimus Goldberg

Lid sinds: 17-10-09

399.384 Reputatie

412 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

108 Leden

7.549 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 10

Afgelopen 30 Dagen: 60

Altijd: 8,450