Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.
    • Remove the three 3.7 mm T4 screws securing the metal cover to the AirPort board bay.

  2. Lift and remove the metal cover from the AirPort board bay.
    • Lift and remove the metal cover from the AirPort board bay.

  3. Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector. Remove the fan assembly ribbon cable from its ZIF socket. Remove the fan assembly ribbon cable from its ZIF socket.
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan assembly ribbon cable connector.

    • Remove the fan assembly ribbon cable from its ZIF socket.

  4. Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable. Disconnect the fan ribbon cable. Disconnect the fan ribbon cable.
    • Use the tip of a spudger to flip the ZIF retaining tab on the fan ribbon cable.

    • Disconnect the fan ribbon cable.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Lid sinds: 17-10-09

468.400 Reputatie

410 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

134 Leden

14.909 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 3

Altijd: 53