Ga door naar hoofdinhoud

Inleiding

Prereq only

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray. Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray.
    • Remove the four (two on each side) 6.5 mm T8 screws securing the hard drive to the drive tray.

  2. Lift the hard drive up and remove it from the drive tray. During reassembly, be sure to thread the hard drive cable through the slot in the drive tray. During reassembly, be sure to thread the hard drive cable through the slot in the drive tray.
    • Lift the hard drive up and remove it from the drive tray.

    • During reassembly, be sure to thread the hard drive cable through the slot in the drive tray.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Sam Goldheart

Lid sinds: 18-10-12

382.581 Reputatie

543 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

102 Leden

9.078 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 4

Altijd: 1,528