Inleiding

This guide will show how to lubricate the power dial. Your power dial will operate smooth after completing this guide.

Unplug the device before proceeding.
  • Unplug the device before proceeding.

  • Remove the phone cord from the phone jack from the base of the headset.

    • Use a plastic opening tool to remove the phone cord.

Voeg opmerking toe

Remove the phone cord screw cap.
  • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

  • Remove the cord from the phone base.

Voeg opmerking toe

  • Use finger to remove the battery cover.

Voeg opmerking toe

  • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

Voeg opmerking toe

  • Remove the 6 screws from the base shell.

    • Remove the 3 12mm screws with the Philips head #1 screw driver.

    • Remove the 3 18mm screws with the Philips head #1 screw driver.

Voeg opmerking toe

  • Pry off the base shell using a Plastic Opener Tool.

Voeg opmerking toe

  • Inside base shell on circuit board, lubricate power switch.

  • CAUTION: Make sure lubricant does not circuit board. This can damage the circuit board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Norberto Sanchez

Lid sinds: 26-09-12

58 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 16-59, Forte Fall 2012 Lid van Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 609