Ga door naar hoofdinhoud

Inleiding

Is your receiver's sound distorted, or not producing sound when watching video? Try replacing the speaker to solve this problem.

  1. Remove the battery cover on the back of the LCD monitor by unscrewing one 5mm Phillips #1 screw. Slide the battery out of the housing. Lightly tap the opposite end of the monitor if the battery does not come right out. Slide the battery out of the housing. Lightly tap the opposite end of the monitor if the battery does not come right out.
    • Remove the battery cover on the back of the LCD monitor by unscrewing one 5mm Phillips #1 screw.

    • Slide the battery out of the housing. Lightly tap the opposite end of the monitor if the battery does not come right out.

  2. Remove the four 6mm Phillips #1 screws on the back of the LCD monitor.
    • Remove the four 6mm Phillips #1 screws on the back of the LCD monitor.

  3. Using a plastic opening tool, gently separate the back panel from the front panel, working the tool around the panel to disconnect it. Carefully remove the back panel
    • Using a plastic opening tool, gently separate the back panel from the front panel, working the tool around the panel to disconnect it.

    • Carefully remove the back panel

    • The speaker wire is connected to the motherboard so DO NOT rip back panel away from the monitor.

  4. Locate the motherboard and carefully pull the red and black speaker wires out of their harness. Locate the motherboard and carefully pull the red and black speaker wires out of their harness. Locate the motherboard and carefully pull the red and black speaker wires out of their harness.
    • Locate the motherboard and carefully pull the red and black speaker wires out of their harness.

  5. Using a metal spudger, pry the melted black plastic away from the speaker. Carefully pull the speaker out of its housing by the wires.
    • Using a metal spudger, pry the melted black plastic away from the speaker.

    • Carefully pull the speaker out of its housing by the wires.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Alex Kusmierz

Lid sinds: 26-09-16

601 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 16-1, Eyestone Fall 2016 Lid van USF Tampa, Team 16-1, Eyestone Fall 2016

USFT-EYESTONE-F16S16G1

4 Leden

12 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 124