Ga door naar hoofdinhoud

Logitech G29 Driving Force Paddle Assembly Replacement

Wat je nodig hebt

  1. Logitech G29 Driving Force Paddle Assembly Replacement, Paddle Assembly: stap 1, afbeelding 1 van 1
    • Remove the six 32mm long 4mm allen screws from the faceplate of the steering wheel

  2. Logitech G29 Driving Force Paddle Assembly Replacement: stap 2, afbeelding 1 van 1
    • Now, Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel.

    • Gently lift off the steering wheel from the hub.

  3. Logitech G29 Driving Force Paddle Assembly Replacement: stap 3, afbeelding 1 van 1
    • Carefully unplug the wire connector from the motherboard of the steering wheel

  4. Logitech G29 Driving Force Paddle Assembly Replacement: stap 4, afbeelding 1 van 1
    • Using the #1 Phillips head screwdriver remove the three 30mm long screws that are behind the steering wheel.

  5. Logitech G29 Driving Force Paddle Assembly Replacement: stap 5, afbeelding 1 van 1
    • Gently pull the paddle assembly off from the base of the device and carefully thread the connector through the hole in the center.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Isaac Seagle

Lid sinds: 09/16/22

391 Reputatie

2 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 37

Afgelopen 30 dagen: 166

Altijd: 3,564