Ga door naar hoofdinhoud

Logitech G29 Driving Force Force-Feedback Motor Replacement

Wat je nodig hebt

  1. Logitech G29 Driving Force Force-Feedback Motor Replacement, Force-Feedback Motor: stap 1, afbeelding 1 van 1
    • Remove the six 32mm long 4mm allen screws from the faceplate of the steering wheel

  2. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 2, afbeelding 1 van 1
    • Now, Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel.

    • Gently lift off the steering wheel from the hub.

  3. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 3, afbeelding 1 van 1
    • Carefully unplug the wire connector from the motherboard of the steering wheel

  4. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 4, afbeelding 1 van 2 Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 4, afbeelding 2 van 2
    • Using the #1 Phillips head screwdriver remove the three 30mm long screws that are behind the steering wheel.

    • Gently pull the paddle assembly off from the base of the device and carefully thread the connector through the hole in the center.

  5. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 5, afbeelding 1 van 1
    • Remove the 15.9mm long silver screws on the bottom of the base of the wheel with a Phillips #1 screwdriver.

  6. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 6, afbeelding 1 van 1
    • Now remove the four 7.3mm long silver screws from the motherboard using a Phillips #2 screwdriver.

    • Then, carefully remove the seven plastic connectors from the motherboard. Make sure to avoid pulling by the wires and to only pull on the plastic

  7. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 7, afbeelding 1 van 1
    • Remove the two black screws using a Phillips #2 screwdriver.

  8. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 8, afbeelding 1 van 1
    • Remove the four 12mm long screws with the phillips #1 screwdriver

  9. Logitech G29 Driving Force Force-Feedback Motor Replacement: stap 9, afbeelding 1 van 1
    • Now that the complete driving assembly is out you can replace it as needed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Isaac Seagle

Lid sinds: 09/16/22

391 Reputatie

2 handleidingen geschreven

2 opmerkingen

how much is this part

glenn castillo - Antwoord

where do u get repayment parts ?

callum smith - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 13

Afgelopen 7 dagen: 89

Afgelopen 30 dagen: 401

Altijd: 6,810