Inleiding

Remove the top cover of the optical drive to access the internals and replace any malfunctioning components.

  1. Insert an open paper clip into the small hole on the left side of the faceplate.
    • Insert an open paper clip into the small hole on the left side of the faceplate.

    • After the tray opens, extend it fully.

  2. Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.
    • Use an opening device to push in the black tabs on the left, right and bottom of the outer chassis to unhook the faceplate.

    • Pull the faceplate away from the main chassis.

    • Unscrew the four 8.5 mm screws on the bottom chassis using a Philips #2 screwdriver.

    • Lift the top and bottom chassis straight up in order to remove them.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

James Biggs

Lid sinds: 12-10-11

596 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 6-5, Regan Fall 2011 Lid van Cal Poly, Team 6-5, Regan Fall 2011

CPSU-REGAN-F11S6G5

2 Leden

3 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 2,342