Inleiding

The scanner unit allows users to scan copies.

  1. Hold the button down with flat end away from the printer. When you hear a click, the duplex unit can be removed from the printer.
    • Hold the button down with flat end away from the printer. When you hear a click, the duplex unit can be removed from the printer.

    Voeg opmerking toe

  2. Remove the duplex unit from the back of the printer with the duplex unit is facing up.
    • Remove the duplex unit from the back of the printer with the duplex unit is facing up.

    Voeg opmerking toe

    • Locate the two screw holes that connect the two cylindrical extensions from the top portion of the scanner unit to the printer.

    Voeg opmerking toe

    • Unscrew the two size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

    Voeg opmerking toe

    • Raise and close the scanner unit to observe that the hinges lock in place when lifted.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Firmly press the hinges inward toward the middle of the printer on both sides at the same time. The hinges should be easily lifted up and removed.

    Voeg opmerking toe

    • Locate the three screws connecting the plastic tray to the printer.

    Voeg opmerking toe

    • Remove the three size#6 (5-mm head) Phillips 1-mm screws connecting the scanner unit to the printer.

    Voeg opmerking toe

    • Remove the plastic cover by unlocking the plastic hinges at the inside edges of the printer. Use a plastic opening tool or a tweezer to slowly move in between the crease around the printer to unlock it.

    Voeg opmerking toe

    • Slowly raise, but do not remove the plastic cover with the scanner unit so that it exposes the three cables connecting the scanner unit to the printer.

    Voeg opmerking toe

    • Carefully unplug the pink cable.

    Voeg opmerking toe

    • Carefully unplug the gray data cable.

    Voeg opmerking toe

    • Carefully unplug the white ribbon data cable.

    Voeg opmerking toe

    • Locate the three ports for the cables from the scanner unit and make sure they are unplugged.

    Voeg opmerking toe

    • Remove the scanner unit with the plastic cover by lifting it up from the bottom portion of the printer.

    • Be careful with the paper tray and make sure it is evenly lifted through the rectangular hole in the plastic tray

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Raymond

Lid sinds: 15-01-13

42 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 18-38, Regan Winter 2013 Lid van Cal Poly, Team 18-38, Regan Winter 2013

CPSU-REGAN-W13S18G38

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 10

Altijd: 877