Inleiding

The adapter connects the power chord to the printer.

  1. Locate adapter and observe that the two contacts, marked by the red rectangle, of the adapter are facing up.
    • Locate adapter and observe that the two contacts, marked by the red rectangle, of the adapter are facing up.

  2. Insert adapter into the bottom-right slot behind the printer with the adapter end facing outward.
    • Insert adapter into the bottom-right slot behind the printer with the adapter end facing outward.

    • Firmly push adapter in until you hear a click.

Conclusie

The adapter should be securely inserted into the back end of the printer and be ready for use.

Één andere persoon heeft deze handleiding voltooid.

Raymond

Lid sinds: 15-01-13

42 Reputatie

7 handleidingen geschreven

Team

Cal Poly, Team 18-38, Regan Winter 2013 Lid van Cal Poly, Team 18-38, Regan Winter 2013

CPSU-REGAN-W13S18G38

4 Leden

9 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 4

Altijd: 706