Inleiding

This guide will demonstrate how to open the neck of the guitar and replace the fret buttons, the colored buttons on the neck that correspond to the notes in the game.

  1. Pull the Lock on the back of the body to detach the neck from the body.
    • Pull the Lock on the back of the body to detach the neck from the body.

  2. Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver. Remove the back of the neck.
    • Remove the 10 screws (each are 1 cm long) on the back of the neck using a T-10 Torx security screwdriver.

    • Remove the back of the neck.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm. Remove the fret PCB
    • Unscrew the two screws on the fret PCB using a PH1 Phillips head screwdriver. Each screw is 0.8 cm.

    • Remove the fret PCB

      • The fret PCB is in very tight. Be careful not to break it.

      • The connector from the neck to the body can easily slide out of place. Make sure it is in position before closing the neck

  5. Remove the blue fret button pad.
    • Remove the blue fret button pad.

      • This pad should not be attached in any way

  6. The fret buttons should now easily slide out. The fret buttons should now easily slide out.
    • The fret buttons should now easily slide out.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Chris

Lid sinds: 18-10-13

752 Reputatie

6 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 7

Afgelopen 7 Dagen: 50

Afgelopen 30 Dagen: 224

Altijd: 9,179