Repareer je spullen Gemeenschap Winkel

Lens Cover Replacement

Inleiding

Here, we will describe how to dissemble your camera in order to properly replace the lens cover.

Wat je nodig hebt

  1. Lens Cover Replacement, Lens Cover: stap 1, afbeelding 1 van 1

    • Unscrew the two small screws on the black side panel of the camera using a PH00 screwdriver. Remove the part.

    Vertaal

  2. Lens Cover Replacement: stap 2, afbeelding 1 van 1

    • You will need to remove the front panel in order to access the lens. Lift the latches on the side of the front panel to remove it entirely, pulling gently in an upward motion.

    Vertaal

  4. Lens Cover Replacement: stap 3, afbeelding 1 van 1

    • Locate silver lens covering.

    Vertaal

  5. Lens Cover Replacement: stap 4, afbeelding 1 van 1

    • Use your PH00 screwdriver to unscrew the lens cover.

    • Remove the screw.

    • Remove the lens cover.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Kathleen

Lid sinds: 01/30/15

225 Reputatie

2 handleidingen geschreven

Medailles: 9

+6 andere badges

Team

University of Kentucky Louisville, Team 1-3, Rountree Winter 2015 Lid van University of Kentucky Louisville, Team 1-3, Rountree Winter 2015

LOUISVILLE-ROUNTREE-W15S1G3

3 Leden

12 handleidingen geschreven

Één opmerking

I found that additional steps are needed between steps 2 and 3 to remove 5 additional screws before the front panel can be removed.

Was my Olympus 850 SW different from the one repaired in that tutorial?

I took pictures that I could insert in the tutorial, but did not find how to do it.

Michel

Michel Martin - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 28

Altijd: 1,030