Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

  1. Remove the two 3mm screws on the back of the device with the Phillips Screwdriver #00 bit. Remove the 2mm screw with a Phillips #00 bit.
    • Remove the two 3mm screws on the back of the device with the Phillips Screwdriver #00 bit.

    • Remove the 2mm screw with a Phillips #00 bit.

    • Using the blue opening tool or spudger, gently remove the back cover to expose the interior of the tablet.

  2. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  3. Remove the three 2mm screws on the back of the left speaker module with the Phillips Screwdriver #00 bit.
    • Remove the three 2mm screws on the back of the left speaker module with the Phillips Screwdriver #00 bit.

    • Remove the ribbon cables connecting the boards to the other electrical components

    • Some of the ribbon cables are secured with clips, simply pry up the clips before sliding them out of the pin connectors.

  4. Gently remove the left speaker module.
    • Gently remove the left speaker module.

    • Replace the old left speaker module with the new left speaker module.

    • Be careful not to damage the ribbon cables on the new left speaker module while reassembling the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Charles Rhode

Lid sinds: 28-09-17

546 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team S2-G4, Nance Fall 2017 Lid van USF Tampa, Team S2-G4, Nance Fall 2017

USFT-NANCE-F17S2G4

3 Leden

12 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 15

Altijd: 994