Ga door naar hoofdinhoud

Lenovo Yoga Tablet 2 830-F Display Replacement

Wat je nodig hebt

  1. Lenovo Yoga Tablet 2 830-F Display Replacement, Display: stap 1, afbeelding 1 van 2 Lenovo Yoga Tablet 2 830-F Display Replacement, Display: stap 1, afbeelding 2 van 2
    • Remove the three screws on the back of the device with the Phillips Screwdriver #00 bit.

    • Using the blue opening tools or spudger, gently remove the back cover to expose the interior of the tablet.

  2. Lenovo Yoga Tablet 2 830-F Display Replacement: stap 2, afbeelding 1 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 2, afbeelding 2 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 2, afbeelding 3 van 3
    • Remove the six screws on the back of the motherboard with the Phillips Screwdriver #00 bit.

    • Remove the three screws on the back of the secondary board with the Phillips Screwdriver #00 bit.

    • Remove the ribbon cables connecting the boards to the other electrical components

    • Some of the ribbon cables are secured with clips, simply pry up the clips before sliding them out of the pin connectors.

  3. Lenovo Yoga Tablet 2 830-F Display Replacement: stap 3, afbeelding 1 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 3, afbeelding 2 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 3, afbeelding 3 van 3
    • Remove the three 2mm screws on the back of the left speaker module with the Phillips Screwdriver #00 bit.

    • Remove the three 2mm screws on the back of the right speaker module.

    • Gently remove both the left and right speaker modules.

  4. Lenovo Yoga Tablet 2 830-F Display Replacement: stap 4, afbeelding 1 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 4, afbeelding 2 van 3 Lenovo Yoga Tablet 2 830-F Display Replacement: stap 4, afbeelding 3 van 3
    • Use the opening tool to pry the battery compartment off the right hand side of the back.

    • This may require a decent amount of force to accomplish. If you feel like the white plastic holder will break, try using the spudger at a different angle.

    • Do not attempt to use the spudger on the right hand side of the device. It must be done on the left side.

    • The display and housing for the screen are one piece and would be bought together.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Mario Gjyli

Lid sinds: 09/28/17

435 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team S2-G4, Nance Fall 2017 Lid van USF Tampa, Team S2-G4, Nance Fall 2017

USFT-NANCE-F17S2G4

3 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 9

Altijd: 4,237