Repareer je spullen Gemeenschap Winkel

Lenovo Yoga 720 Bottom Cover Replacement

Geschreven door: Aiden (en een andere inzender)
  • Reacties: 0
  • Favorieten: 0
  • Voltooide reparaties: 5

Moeilijkheid

Eenvoudig

Stappen

3

Tijd vereist

1 - 3 minuten

Secties

1

Markeringen

1

Member-Contributed Guide

Handleiding met medewerking van leden

Een fantastisch lid van onze gemeenschap heeft deze handleiding gemaakt. Deze wordt niet bijgehouden door het team van iFixit.

Inleiding

This guide shows how to properly remove the bottom case.

  1. Before you begin, be sure to turn off your laptop and discharge the battery down to 25%. Start by flipping the device over so that you see the screws. Remove seven Torx T5 short screws.

    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Start by flipping the device over so that you see the screws.

    • Remove seven Torx T5 short screws.

    • Remove three Torx T5 long screws.

    Bewerken

  3. Starting from the USB port, use your opening tool to gently pry up the case. Make sure you are prying on the cover itself, not the metal shield around the USB port. Pry along the laptop in the order shown by the arrows.
    Gereedschap gebruikt in deze stap:
    iFixit Opening Tool
    $1.99

    • Starting from the USB port, use your opening tool to gently pry up the case.

    • Make sure you are prying on the cover itself, not the metal shield around the USB port.

    • Pry along the laptop in the order shown by the arrows.

    • Do NOT pry along the top side, or you risk damaging the casing. Stay with the arrows.

    Bewerken

  4. Lift the case from the bottom side. NOT the side with the hinges. When you feel resistance, do NOT keep lifting or you will damage the housing. Once you feel resistance, gently pull the case towards you. (away from the hinges.)

    • Lift the case from the bottom side. NOT the side with the hinges.

    • When you feel resistance, do NOT keep lifting or you will damage the housing.

    • Once you feel resistance, gently pull the case towards you. (away from the hinges.)

    • Remove the case.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Aiden

Lid sinds: 19-09-15

15.193 Reputatie

20 handleidingen geschreven

Badges: 49

+46 andere badges

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 38

Altijd: 6,103