Ga door naar hoofdinhoud

Inleiding

The heat sink transfers excess thermal energy away from the CPU to the fan and cooling system in order to protect the CPU's delicate components.

  1. Remove all twelve 6 mm long screws on the back of the laptop with a Phillips #1 screwdriver. Apply a lot of pressure to prevent the screws from stripping.
    • Remove all twelve 6 mm long screws on the back of the laptop with a Phillips #1 screwdriver.

    • Apply a lot of pressure to prevent the screws from stripping.

    • Make sure to turn off the computer first!

  2. Pull off the back cover of the laptop. It should come off easily. Pull off the back cover of the laptop. It should come off easily.
    • Pull off the back cover of the laptop. It should come off easily.

  3. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  4. Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver. Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver.
    • Remove all six 7mm screws from the heat sink using the Phillips #1 screwdriver.

  5. Remove the heat sink. Take note of the gray thermal paste on the back of the heat sink.
Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Kevin Silken

Lid sinds: 21-01-15

397 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 18-1, Maness Winter 2015 Lid van Cal Poly, Team 18-1, Maness Winter 2015

CPSU-MANESS-W15S18G1

5 Leden

7 handleidingen geschreven

Één commentaar

Hope someone see this cmt. I cannot lift up the heat sink for some reason. All 6 screws are removed. Any advice?

Dalala - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 7

Afgelopen 7 Dagen: 13

Afgelopen 30 Dagen: 57

Altijd: 4,580