Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Onderdelen

  1. First of all, you should have backed up your personal data, for example to an external USB drive, in particular your My Documents etc or /home Switch off, close the lid and turn the computer over.
    • First of all, you should have backed up your personal data, for example to an external USB drive, in particular your My Documents etc or /home

    • Switch off, close the lid and turn the computer over.

    • On the left side, identify the screw with a cylinder symbol next to it. This retains the hard disk cover.

  2. Remove the screw from the disk drive bay cover. Remove the cover, lifting it and gently pulling it to the left. Pull on the black plastic tab to extract the hard drive.
    • Remove the screw from the disk drive bay cover.

    • Remove the cover, lifting it and gently pulling it to the left.

    • Pull on the black plastic tab to extract the hard drive.

  3. Remove the protective rubber side pieces. Remove the four screws from the sides. Remove the drive from the enclosure.
    • Remove the protective rubber side pieces.

    • Remove the four screws from the sides.

    • Remove the drive from the enclosure.

    • You are ready to put your SSD in the enclosure.

Conclusie

To reassemble your PC , proceed in the reverse order

4 andere personen hebben deze handleiding voltooid.

Met dank aan deze vertalers:

100%

Deze vertalers helpen ons de wereld te repareren! Wil je bijdragen?
Begin met vertalen ›

Ludovic

Lid sinds: 18-09-17

395 Reputatie

2 handleidingen geschreven

Team

Francophones Lid van Francophones

Community

15 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 87

Altijd: 2,039