Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

Users will learn how to remove the bezel from a Lenovo Thinkpad x230.

Onderdelen

Geen onderdelen opgegeven.

  1. Turn off the computer.
    • Turn off the computer.

    • Disconnect the charging cable from the computer.

    • Failure to unplug the cable could result in electric shock.

  2. Flip the computer upside down.
    • Flip the computer upside down.

    • The red rectangle shows the location of the battery.

  3. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.
    • Locate the two switches that lock the battery. Push the left-hand switch outward into the "unlocked" position.

  4. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  5. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer. Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.
    • Now push and hold the right clip to the right while using your other hand to gently slide the battery away from the computer.

  6. Remove the plastic screw covers with an iFixit opening pick.
    • Remove the plastic screw covers with an iFixit opening pick.

  7. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver. Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.
    • Remove the screws (0.4, 0.5 cm) from the bottom corners of the bezel using a Phillips #0 screwdriver.

  8. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick. Carefully remove the plastic bezel cover using an iFixit opening pick.
    • Carefully remove the plastic bezel cover using an iFixit opening pick.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Lino Virgen

Lid sinds: 10-10-16

791 Reputatie

3 handleidingen geschreven

Team

Texas Tech, Team 6-3, Bennett Fall 2016 Lid van Texas Tech, Team 6-3, Bennett Fall 2016

TTU-BENNETT-F16S6G3

4 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 60

Altijd: 3,838