Ga door naar hoofdinhoud

Inleiding

In order to access and replace the laptops components, the backplate must be removed. For this guide, you will need a prying tool and a Phillips #1 screwdriver. This process is not difficult but is required for most of this laptops repairs.

Onderdelen

Geen onderdelen opgegeven.

  1. Make sure to power down and turn off your device before proceeding with the repair. Flip your laptop over so that the backside is facing you.
    • Make sure to power down and turn off your device before proceeding with the repair.

    • Flip your laptop over so that the backside is facing you.

  2. Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.
    • Using a Phillips #1 screwdriver, remove the eight screws securing the backplate.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen

    Apple Watch Kits

    Screen and battery repairs just got easier.

    Nu winkelen
  4. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate. Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.
    • Using the metal spudger, wedge it in the seam where the backplate meets the front plate and run the tool along the seam to separate the backplate.

  5. Remove the back panel from the device.
    • Remove the back panel from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Terelle Montalvo

Lid sinds: 22-10-18

1.117 Reputatie

8 handleidingen geschreven

Team

UMass Dartmouth, Team S1-G5, Simcock Fall 2018 Lid van UMass Dartmouth, Team S1-G5, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G5

3 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 26

Altijd: 331