Ga door naar hoofdinhoud

Inleiding

Unlike some laptops that have their keyboard built-in, Thinkpad keyboards can be easily removed in just a few steps.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the eight 14mm screws using the Phillips #0 Screwdriver.
    • Remove the eight 14mm screws using the Phillips #0 Screwdriver.

  2. Lift the palm rest panel.
    • Lift the palm rest panel.

    • Lift the palm rest panel slowly; there is a ribbon cable connected under it.

  3. While lifting the panel, lift the keyboard up. Be sure to lift the keyboard slowly; there is a ribbon cable attached under it.
    • While lifting the panel, lift the keyboard up.

    • Be sure to lift the keyboard slowly; there is a ribbon cable attached under it.

  4. Use the spudger to disconnect the ribbon cable.
    • Use the spudger to disconnect the ribbon cable.

  5. Remove the keyboard.
    • Remove the keyboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Matthew Fajardo

Lid sinds: 14-04-15

510 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 5-7, Maness Spring 2015 Lid van Cal Poly, Team 5-7, Maness Spring 2015

CPSU-MANESS-S15S5G7

4 Leden

6 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 13

Altijd: 2,849