Repareer je spullen Gemeenschap Winkel

Lenovo ThinkPad T440p Display Replacement

Geschreven door: Rasheed Adam (en een andere inzender)
  • Reacties: 0
  • Favorieten: 0
  • Voltooide reparaties: 2

Moeilijkheid

Gemiddeld

Stappen

11

Tijd vereist

10 minuten

Secties

1

Markeringen

0

Inleiding

Display not working and needs replacing? Want to upgrade to a higher quality display? This guide will show you how to remove your T440p display to achieve just that.

Removing the display isnā€™t that difficult and doesnā€™t take too long. Youā€™ll just need a plastic opening tool, a Phillips #0 screwdriver, and just 10 minutes of your time.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Flip the laptop over so that the bottom of the laptop is facing you. Flip the laptop over so that the bottom of the laptop is facing you.

    • Flip the laptop over so that the bottom of the laptop is facing you.

    Bewerken

  2. Slide each of the battery latches away from each other into the unlocked location. Slide each of the battery latches away from each other into the unlocked location.

    • Slide each of the battery latches away from each other into the unlocked location.

    Bewerken

  3. Slide the battery out of the battery compartment. Slide the battery out of the battery compartment.

    • Slide the battery out of the battery compartment.

    Bewerken

  4. Flip the laptop over so that the top of the laptop faces you. Flip the laptop over so that the top of the laptop faces you.

    • Flip the laptop over so that the top of the laptop faces you.

    Bewerken

  6. Lift the lid of the laptop until the top of the lid is touching the ground. Lift the lid of the laptop until the top of the lid is touching the ground.

    • Lift the lid of the laptop until the top of the lid is touching the ground.

    Bewerken

  7. Carefully pry the display bezels away from the display using the plastic opening tool. The edges on the underside of the bezel that touches the display may be sharp. The edges on the underside of the bezel that touches the display may be sharp.

    • Carefully pry the display bezels away from the display using the plastic opening tool.

    • The edges on the underside of the bezel that touches the display may be sharp.

    Bewerken

  8. Use the Phillips #0 screwdriver to remove the four 3mm display screws. Use the Phillips #0 screwdriver to remove the four 3mm display screws.

    • Use the Phillips #0 screwdriver to remove the four 3mm display screws.

    Bewerken

  9. Carefully lift the display up and place it on the keyboard.

    • Carefully lift the display up and place it on the keyboard.

    • Don't remove it from the laptop. There's a cable still attached to it.

    Bewerken

  10. Locate the latch attached to the display cable. Grab the latch and flip it over so that it is facing away from you. Grab the latch and flip it over so that it is facing away from you.

    • Locate the latch attached to the display cable.

    • Grab the latch and flip it over so that it is facing away from you.

    Bewerken

  11. Gently remove the cable from the display by pulling it directly away from you.

    • Gently remove the cable from the display by pulling it directly away from you.

    Bewerken

  12. Remove the display from the computer. Remove the display from the computer.

    • Remove the display from the computer.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Rasheed Adam

Lid sinds: 27-07-20

247 Reputatie

1 Handleiding geschreven

Badges: 5

+2 andere badges

Team

UW Tacoma, Team S1-G19, Cardinal Summer 2020 Lid van UW Tacoma, Team S1-G19, Cardinal Summer 2020

UWT-CARDINAL-SU20S1G19

1 Lid

1 handleiding geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 44

Altijd: 580