Ga door naar hoofdinhoud

Inleiding

The back cover is the protective layer for your computer that covers many components that will likely be replaced. The process is very simple and you will only need to remove two screws with a Phillips #1 screw driver.

Onderdelen

Geen onderdelen opgegeven.

  1. Flip the laptop so that the back is facing up.
    • Flip the laptop so that the back is facing up.

  2. Slide the battery latches to the unlocked position. Slide the battery latches to the unlocked position.
    • Slide the battery latches to the unlocked position.

  3. Slide the battery pack out of the battery slot. Slide the battery pack out of the battery slot.
    • Slide the battery pack out of the battery slot.

  4. Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover. Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover.
    • Use a Phillips #1 screwdriver to remove the two 9mm screws holding the back cover.

  5. Slide down the back cover.
    • Slide down the back cover.

  6. Remove the back cover.
    • Remove the back cover.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Christian Abad

Lid sinds: 20-03-19

1.156 Reputatie

7 handleidingen geschreven

Team

UMass Dartmouth, Team S6-G5, Peak Spring 2019 Lid van UMass Dartmouth, Team S6-G5, Peak Spring 2019

UMASSD-PEAK-S19S6G5

3 Leden

7 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 52

Altijd: 1,652