Lenovo ThinkPad Edge E530 / E530c - how to change or clean the Fan and the Cooling System.


Video overzicht

  1. Switch-off the Laptop and remove the battery.
    • Switch-off the Laptop and remove the battery.

    • The HDD/Memory Cover is held by 3x Phillips screws. Remove them.

    • Remove the Cover.

    Voeg opmerking toe

  2. Disconnect the Fan cable.
    • Disconnect the Fan cable.

    • Remove the 2x screws from the Fan module.

    • Unscrew 4x screws around the processor.

    • Carefully lift the Cooling System.

    Voeg opmerking toe

    • Use a lint-free cloth and isopropyl alcohol to clean the old thermal compound.

    • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

    • Separate the Fan from the Heat-sink.

    Voeg opmerking toe

    • Use a soft anti static brush and clean the Heat-sink on the inside.

    • Before installing a new Cooling System or reinstalling the old one, you must clean the processor from the old thermal compound and put a new one.

    Voeg opmerking toe


To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.


Lid sinds: 09-12-13

158.692 Reputatie

304 handleidingen geschreven


Master Techs Lid van Master Techs


278 Leden

755 handleidingen geschreven

Één commentaar

Very, very well done video on this guide for the Lenovo Thinkpad e530 laptop.

My compliments to the author of this guide.

James Harnsberger - Antwoord

Voeg opmerking toe


Afgelopen 24 Uren: 7

Afgelopen 7 Dagen: 19

Afgelopen 30 Dagen: 70

Altijd: 5,227