Ga door naar hoofdinhoud

Inleiding

In order to remove and replace the power button on your tablet, a soldering iron will be needed.

Onderdelen

Geen onderdelen opgegeven.

  1. Lenovo Tab 2 A10-70 Power Button Replacement, Power Button: step 1, image 1 of 2 Lenovo Tab 2 A10-70 Power Button Replacement, Power Button: step 1, image 2 of 2
    • Use a plastic opening tool to pry open the back cover of the tablet.

  2. Lenovo Tab 2 A10-70 Power Button Replacement: step 2, image 1 of 1
    • The power button strip is only held in place by a small piece of double-sided tape.

    • Gently use the precision tweezers to separate the power button strip from the interior frame of the tablet.

  3. Lenovo Tab 2 A10-70 Power Button Replacement: step 3, image 1 of 1
    • Be careful with the soldering iron to avoid injury.

    • Remove the power button from the motherboard.

    • Use the soldering iron to heat up the connections. Gently pull away from the motherboard after connections are detached.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Tyler Hagenlocher

Lid sinds: 08-02-16

343 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 12-6, Eyestone Spring 2016 Lid van USF Tampa, Team 12-6, Eyestone Spring 2016

USFT-EYESTONE-S16S12G6

4 Leden

10 handleidingen geschreven

Één commentaar

Thank you for making this helpfull instrutions.

Where i can get the Buttons?

Simon - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 66

Altijd: 5,635