Repareer je spullen Gemeenschap Winkel

Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement

Inleiding

This guide aims to teach you how to replace the USB 2.0 and 3.5 mm headphone ports of the Lenovo Ideapad 110S-11IBR.

Wat je nodig hebt

  1. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, Battery: stap 1, afbeelding 1 van 1

    • Ensure that your device is completely OFF before performing this procedure.

    • Unscrew the eleven 4 mm Phillips #0 screws on the bottom of the device.

    Bewerken

  2. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 2, afbeelding 1 van 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 2, afbeelding 2 van 2

    • Separate the back lid from the laptop using a plastic opening tool.

    • Lift the back lid off of the device.

    Bewerken

  3. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 3, afbeelding 1 van 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 3, afbeelding 2 van 2

    • Remove the battery connector from its socket by pulling the cable away from the hinge using your fingers or a plastic opening tool.

    • Do not pull on the socket itself or you risk damaging the motherboard.

    • Remove the two pieces of tape that are holding the battery down.

    Bewerken

  5. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 4, afbeelding 1 van 1

    • Remove the five 4 mm Phillips screws securing the battery.

    Bewerken

  6. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 5, afbeelding 1 van 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 5, afbeelding 2 van 2

    • Lift the battery up and out of the device.

    Bewerken

  7. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: stap 6, afbeelding 1 van 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement, USB & Headphone Jack PCB Board: stap 6, afbeelding 2 van 2

    • Unscrew the three 4 mm Phillips screws.

    Bewerken

  8. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 7, afbeelding 1 van 2 Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 7, afbeelding 2 van 2

    • Unlatch and remove the ribbon cable.

    • Ribbon cables can be fragile, so avoid excessively bending it.

    Bewerken

  9. Lenovo Ideapad 110S-11IBR USB & Headphone Jack PCB Board Replacement: stap 8, afbeelding 1 van 1

    • Remove the card from the laptop.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 5

Altijd: 1,662