Repareer je spullen Gemeenschap Winkel

Lenovo IdeaPad Y410p Screen Replacement

Inleiding

When your laptop screen cracks the repairs and replacements can be costly. This guide will show you how to replace the Lenovo IdeaPad Y410p screen while saving hundreds of dollars.

Wat je nodig hebt

  1. Lenovo IdeaPad Y410p Screen Replacement, Battery: stap 1, afbeelding 1 van 1

    • Turn off your laptop before starting.

    • Flip the laptop over so the model stickers are facing up.

    Bewerken

  2. Lenovo IdeaPad Y410p Screen Replacement: stap 2, afbeelding 1 van 2 Lenovo IdeaPad Y410p Screen Replacement: stap 2, afbeelding 2 van 2

    • Slide the left battery lock to the unlock position and release.

    • Slide the right battery lock to the unlock positon and hold it in place.

    Bewerken

  4. Lenovo IdeaPad Y410p Screen Replacement: stap 3, afbeelding 1 van 2 Lenovo IdeaPad Y410p Screen Replacement: stap 3, afbeelding 2 van 2

    • While holding the right battery lock in the unlock position, slide the battery carefully out of the laptop and set it aside.

    Bewerken

  5. Lenovo IdeaPad Y410p Screen Replacement, Screen: stap 4, afbeelding 1 van 2 Lenovo IdeaPad Y410p Screen Replacement, Screen: stap 4, afbeelding 2 van 2

    • Using the metal spudger, pry the screen cover off from all sides.

    • Carefully lift the screen cover up and outwards.

    • Place the screen cover aside.

    Bewerken

  6. Lenovo IdeaPad Y410p Screen Replacement: stap 5, afbeelding 1 van 3 Lenovo IdeaPad Y410p Screen Replacement: stap 5, afbeelding 2 van 3 Lenovo IdeaPad Y410p Screen Replacement: stap 5, afbeelding 3 van 3

    • Using the Phillips #0 screwdriver, remove the four 8mm screws from each corner of the screen.

    • Carefully lift the screen up and place it face down on the keyboard.

    • A thick cord connects the bottom of the screen to the computer. Do not tug or remove this cord from the computer.

    Bewerken

  7. Lenovo IdeaPad Y410p Screen Replacement: stap 6, afbeelding 1 van 2 Lenovo IdeaPad Y410p Screen Replacement: stap 6, afbeelding 2 van 2

    • Remove the adhesive tape from the small rectangular connector at the bottom of the screen.

    • Carefully pull the wire connector from the screen connector.

    • Remove the screen.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Nick Torres

Lid sinds: 09/18/18

580 Reputatie

5 handleidingen geschreven

Medailles: 9

+6 andere badges

Team

University of North Texas, Team S3-G6, Raign Fall 2018 Lid van University of North Texas, Team S3-G6, Raign Fall 2018

UNT-RAIGN-F18S3G6

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 3

Altijd: 333