Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Use this guide to fully remove the back panel on your Lenovo IdeaPad Flex 5-1470 laptop.

Removing the back panel of the laptop is the most crucial part of most all repairs, seeing as it precedes being able to replace any of the internal parts.

Before using this guide, make sure to review the troubleshooting page—oftentimes, laptops can be fixed without disassembling them.

Make sure to power off your laptop completely and disconnect from any external power source before beginning the process of removal.

  1. Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.
    • Remove all ten 6.6 mm screws with a Phillips #00 screwdriver.

  2. Use the plastic opening tool to lift up and remove the casing. Use the plastic opening tool to lift up and remove the casing.
    • Use the plastic opening tool to lift up and remove the casing.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Tori Nardoni

Lid sinds: 23-01-20

253 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team S2-G5, White Winter 2020 Lid van Cal Poly, Team S2-G5, White Winter 2020

CPSU-WHITE-W20S2G5

4 Leden

11 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 32

Altijd: 356