Onderdelen

Geen onderdelen nodig.

Lay the computer down on its side as shown.
  • Lay the computer down on its side as shown.

  • Remove the two 14mm screws shown. The screws are loose enough to unscrew with your hands.

Voeg opmerking toe

Gently slide the side panel straight back and remove from the computer.
  • Gently slide the side panel straight back and remove from the computer.

Voeg opmerking toe

Unplug both sets of wires attaching the power supply unit to the motherboard. The largest connection requires a significant amount of force to be removed.
  • Unplug both sets of wires attaching the power supply unit to the motherboard.

  • The largest connection requires a significant amount of force to be removed.

Voeg opmerking toe

Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive. Unplug all cords attached to the optical drive and hard drive.
  • Unplug all cords attached to the optical drive and hard drive.

Voeg opmerking toe

Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.
  • Using the Phillips #2 driver, unscrew the four 8mm screws attaching the power supply unit to the outside of the computer.

Voeg opmerking toe

Remove the power supply unit by pulling away from the screw side and then out.
  • Remove the power supply unit by pulling away from the screw side and then out.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Timothy Grebe

Lid sinds: 19-10-14

1.304 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 10-39, Amido Fall 2014 Lid van Cal Poly, Team 10-39, Amido Fall 2014

CPSU-AMIDO-F14S10G39

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 5

Afgelopen 30 Dagen: 33

Altijd: 2,039