Lenovo Horizon 2s Battery Replacement

Inleiding

Bring your two-in-one tablet back to life with a new battery.

This guide will provide step-by-step instruction on how to detach the back panel, which is designed to prevent damage to interior components. For peak performance of this newly replaced battery, drain the device below 10%, then charge up to 100% uninterrupted.

Stap 1 Rear Case

Lenovo Horizon 2s Battery Replacement, Rear Case: stap 1, afbeelding 1 van 3

Lenovo Horizon 2s Battery Replacement, Rear Case: stap 1, afbeelding 2 van 3

Lenovo Horizon 2s Battery Replacement, Rear Case: stap 1, afbeelding 3 van 3

Flip the device so the rear case is facing upward.
With the plastic opening tool carefully pry the plastic piece shown in the picture, until it is completely removed from the case.

Vertaal

Stap 2

Using your fingers, carefully remove the rubber boot from the right side of the rear case.
With the Phillips #1 head, remove the screw placed directly under the rubber boot.

Vertaal

Stap 3

Using the plastic opening tool, push the display screen on the device forward until it separates from the rear casing.

Vertaal

Stap 4

Using the plastic opening tool, carefully pry around the perimeter of the screen until the entire screen is completely separated from the rear casing.

Vertaal

Stap 5

Lenovo Horizon 2s Battery Replacement: stap 5, afbeelding 3 van 3

Before completely separating the screen from the rear casing you will carefully detach two wires that are connected to both sides of the device. This will allow you to completely separate the rear casing from screen.

Vertaal