Inleiding
When connecting to the internet, the computer should see the available wifi signals. If it cannot find any signals, the wireless card could be the problem.
Wat je nodig hebt
-
-
Push the left switch (labeled 1) to the left to show red underneath. This will unlock battery.
-
Push the right switch (labeled 2) to the right. This will eject battery.
-
-
-
Remove the three 6mm Phillips #0 screws holding the back access panel on.
-
-
-
-
Disconnect the two plugs on the wireless card by pulling them up with a small tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
6 andere personen hebben deze handleiding voltooid.