Lenovo Flex 6-11IGM Back Panel Replacement - iFixit reparatiehandleiding

Inleiding

If your Lenovo Flex 6-11IGM (model #: 81A70005US) has a back panel that is cracked or dented, use this guide to replace the back panel (bottom panel).

The back panel keeps the inner components of the laptop from foreign liquids and hard surfaces the laptop may encounter that could cause damage to the device. A damaged back panel could compromise the protection and safety of the inner components, therefore making it easier for the device to break.

Before beginning, make sure you power off the device, and make sure the laptop is closed for an easier and safer replacement.

Wat je nodig hebt

Stap 1 Back Panel

Lenovo Flex 6-11IGM Back Panel Replacement, Back Panel: stap 1, afbeelding 1 van 1

Flip the device over and lay it down with the underside facing upwards.

Stap 2

Lenovo Flex 6-11IGM Back Panel Replacement: stap 2, afbeelding 1 van 2

Lenovo Flex 6-11IGM Back Panel Replacement: stap 2, afbeelding 2 van 2

Remove the ten screws with a Phillips #00 screwdriver.

Stap 3

Lenovo Flex 6-11IGM Back Panel Replacement: stap 3, afbeelding 1 van 1

Using a plastic opening tool, make your way around the edge of the laptop.

Stap 4

Lenovo Flex 6-11IGM Back Panel Replacement: stap 4, afbeelding 1 van 2

Lenovo Flex 6-11IGM Back Panel Replacement: stap 4, afbeelding 2 van 2

After making sure the back panel is completely free from the body, remove the back panel.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Juan Palominos JR

Lid sinds: 01/23/20

217 Reputatie

2 handleidingen geschreven

+3 andere badges

Team

Cal Poly, Team S2-G4, White Winter 2020 Lid van Cal Poly, Team S2-G4, White Winter 2020

CPSU-WHITE-W20S2G4

3 Leden

4 handleidingen geschreven

0 opmerkingen

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 607