Repareer je spullen Gemeenschap Winkel

Lenovo Flex 3-1120 Hard Drive Replacement

Inleiding

Use this guide if your current hard drive is damaged and needs to be replaced, or if you are simply looking to upgrade your storage.

Wat je nodig hebt

  1. Lenovo Flex 3-1120 Hard Drive Replacement, Bottom Panel: stap 1, afbeelding 1 van 1

    • Lay the computer down with the bottom panel facing up.

    Vertaal

  2. Lenovo Flex 3-1120 Hard Drive Replacement: stap 2, afbeelding 1 van 2 Lenovo Flex 3-1120 Hard Drive Replacement: stap 2, afbeelding 2 van 2

    • Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.

    • Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

    Vertaal

  3. Lenovo Flex 3-1120 Hard Drive Replacement: stap 3, afbeelding 1 van 1

    • Wedge the plastic opening tool into the small space under the back panel.

    • Use the plastic opening tool as a lever to separate the bottom panel from the computer.

    • Slide the tool along the edges of the computer until the bottom panel is completely separated.

    • You may start prying the bottom panel on any edge.

    Vertaal

  4. Lenovo Flex 3-1120 Hard Drive Replacement: stap 4, afbeelding 1 van 1

    • Lift the bottom panel off of the computer.

    Vertaal

  6. Lenovo Flex 3-1120 Hard Drive Replacement, Hard Drive: stap 5, afbeelding 1 van 1

    • Locate the hard drive in the bottom left of your computer.

    Vertaal

  7. Lenovo Flex 3-1120 Hard Drive Replacement: stap 6, afbeelding 1 van 2 Lenovo Flex 3-1120 Hard Drive Replacement: stap 6, afbeelding 2 van 2

    • Locate the three 3.5mm Phillips screws on the corners of the hard drive.

    • Remove the three screws with a size 0 Phillips screwdriver.

    Vertaal

  8. Lenovo Flex 3-1120 Hard Drive Replacement: stap 7, afbeelding 1 van 1

    • Follow the wire out from the right side of the hard drive to locate where the hard drive connects to the motherboard.

    Vertaal

  9. Lenovo Flex 3-1120 Hard Drive Replacement: stap 8, afbeelding 1 van 1

    • Lift off the strip of tape securing the wire down to the computer.

    Vertaal

  10. Lenovo Flex 3-1120 Hard Drive Replacement: stap 9, afbeelding 1 van 1

    • Pull the connector out of its port on the motherboard.

    Vertaal

  11. Lenovo Flex 3-1120 Hard Drive Replacement: stap 10, afbeelding 1 van 1

    • Lift the hard drive out from the computer.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

Geoff Bentz

Lid sinds: 03/09/16

934 Reputatie

5 handleidingen geschreven

Medailles: 17

+14 andere badges

Team

UMass Dartmouth, Team 7-1, Catania Spring 2016 Lid van UMass Dartmouth, Team 7-1, Catania Spring 2016

UMASSD-CATANIA-S16S7G1

4 Leden

7 handleidingen geschreven

4 opmerkingen

How do you reload operating system.... for example windows 10?

supermac200 - Antwoord

How do I get Windows 10 working again after replacing hard drive on Lenovo Flex 3?

arcinko - Antwoord

Demo models of this do not have any SATA connector.

Elilla Shadowheart - Antwoord

That sata connector is the worst thing ever

dilleremail - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 7

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 46

Altijd: 10,806