Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

This guide will show how to remove and install ram card in your Edge 15. This can be used to replace a broken card or to add more ram to increase the ram in your computer.

  1. With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.
    • With the laptop upside-down, remove all 11 M2 x 6.0mm screws from the cover plate using the Phillips #0 screwdriver.

  2. Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.
    • Gently lift the cover plate off the body of the laptop, ensuring that it does not pull on any components such as the USB ports.

  3. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  4. Release clips on both sides of ram unit. Release clips on both sides of ram unit.
    • Release clips on both sides of ram unit.

  5. With ram unit now erect use hands to remove unit from its slot. Place new ram unit into the slot and lightly press down to snap it back into place.
    • With ram unit now erect use hands to remove unit from its slot.

    • Place new ram unit into the slot and lightly press down to snap it back into place.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

ryan sanders

Lid sinds: 27-09-17

299 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team S8-G1, Banghart Fall 2017 Lid van Cal Poly, Team S8-G1, Banghart Fall 2017

CPSU-BANGHART-F17S8G1

5 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 26

Altijd: 1,008